APT-60H Liter 60 / Gal 14

APT-60H

Model Number APT-60H
Tank Volume Liter 60
Gal 14
Diameter cm 39.0
inch 15.3
Height cm 42.8
inch 16.9
Length cm 53.6
inch 21.1
N.W. Kg 9.9
Lbs 21.8
G.W. Kg 11.2
Lbs 24.7
Shipping Volume CUF 3.43

APT-60H|Pressure Tank|filled 100% nitrogen, CE|Aquasky

1.    Suitable for ESP for 1.5 HP Motor
2.    Diaphragm membrane pressure tank for cold sanitary water circuits, pressurized systems, and storage systems
3.    Rubber membrane produced according to the DIN 4807 regulation
4.    High-performance variable geometry membrane
5.    Polypropylene liner and the diaphragm membrane create a water zone to avoid water contact with the tank's metallic surface, so the tank is able to use for drinking water. 
6.    The Stainless steel water connector is a perfect connection for water pipe with lead-free and chemical-free. 
7.    100% made in Taiwan
8.    Produced according to the standards established by PED 2014/68/EU and EN 13831 regulations
9.    Certification: CE, ISO9001, UPC, NSF/ANSI 61, ACS, KC, NSF/ANSI 372
10.    High level of customization
11.    Epoxy powder exterior painting to guarantee a high level of protection against oxidation and a fine aesthetic final quality
12.    The industries ONLY fill 100% Nitrogen pre-charge pressure tank. To avoid temperature change creates pre-charge change. 
13.    Accurate and extensive first-rate quality controls during all manufacturing process phases. All products are 100% pressure tested. 

Aquasky Enterprise Corp. provides end-to-end pressure tank manufacturing solutions, proved the best quality pressure tank to support international distributors serving in the residential water cleaning, water heater, air conditioning, and solar water heater as well as the residential and commercial pumping system. Aquasky products are manufactured in Taiwan, sold to the United States, Europe, Asia, and other countries.

PumPlus Pressure tank is an essential part of a pressurized water system that provides water pressure at a set level. The tank stores supplemental water between the diaphragm and liner, and the pressurized air chamber is able to create a supply circle. This process reduces the number of times the motor need to start in order for the system pressure to remain at the set level. The tension of the diaphragm maintains water pressure within the system, ensuring proper operation of the dishwasher and washing machine, and robust flow for showering and bathing. PumPlus pressure tank is an energy-saving device and no maintenance is needed. 

Pumplus APT-60H is suitable for ESP for 1.5 HP Motor. Epoxy powder exterior painting to guarantee a high level of protection against oxidation and a fine aesthetic final quality. The industries ONLY fill 100% Nitrogen pre-charge pressure tank. To avoid temperature change creates pre-charge change. Accurate and extensive first-rate quality controls during all manufacturing process phases. All products are 100% pressure tested.